Reception of a single satellite via a connected LNC
(LNB).
1
Select satellite.
Press
J
to continue.
2
Select
Dual Band (low/high)
or
Single Band.
Here you specify if you use a Dual Band (Universal)
LBN or Single LBN.
Press
J
to continue.
3
Specify here the oscillator frequency for your LNB.
Normally you do not need to change the values
for high and low band, unless the LNB of your
satellite system uses a different oscillator frequency
(important for the frequency display).
If you use the setting
Single Band
in step
Dual/
Single Band,
you only have to define the LNB
frequency for the Low Band.
4
Press
J
to continue.
See
Setting options for all DVB-S reception
on
page 13
to continue.
Quick guide
1
Select
Satellite1/Satellite2
2
Select satellite name from list and press
OK.
Press
J
to continue.
3
Specify here the oscillator frequency for your LNB.
Normally you do not need to change the values
for high and low band, unless the LNB of your
satellite system uses a different oscillator frequency
(important for the frequency display).
4
Press
OK
to select frequency and press
J
to
continue.
See
Setting options for all DVB-S reception
on
page 13
to continue.
Select DiSEqC multiswitch and adpat settings for this
selection.
11
Setting options for Single satellite
Setting options for Max. 4 satellites on DiSEqC
multiswitch
Setting options for 2 satellites on 22kHz
switchbox / 2 satellites on Toneburst switch
Summary of Contents for Aquos LC-60LE751K
Page 64: ......
