73
3D setup
E
Basic operation
Go to “HOME” > “TV Menu” > “Setup” > “Option”
> “3D setup” > select the menu you want to set.
3D auto change
This function allows the TV to switch to 3D mode
automatically when a 3D identification signal is detected.
Item
Mode 1
3D mode is selected automatically when
a 3D signal is detected while viewing
video from a VOD service or HDMI-
connected equipment.
Mode 2
3D mode is selected automatically when,
in addition to detecting a 3D signal while
viewing video from a VOD service or
HDMI-connected equipment, a video
pattern with “Side by Side” or “Top and
Bottom” format is also detected.
Off
Auto change is not performed.
NOTE
• 3D signals may not be detected depending on the signal
format.
3D depth control
Select the method for adjusting the 3D depth.
Item
Auto
Adjusts the depth automatically.
Manual
Manually adjusts the depth using the
function “Depth change”.
NOTE
• This function is only available when the input signal is 3D.
• This function is not displayed depending on the type of 3D
signal.
Depth change
Adjusts the depth manually. “0” is the level where no
adjustment is made.
NOTE
• This function is only available when “3D depth control” is
"Manual".
2D
s
3D convert effect
You can adjust the 3D effect when converting images
from 2D mode to 3D mode. Select a desired level of
convert effect from
e
1 to
e
16.
NOTE
• This function is only available when converting 2D images to
3D images.
• When you use this function, image conversion on the TV will
result in some differences in the original images and how they
appear.
• 2D images that have been converted to 3D images may be
viewed only for personal use.
3D still image effect setting
Select the method for adjusting the 3D still image effect
(depth).
Item
Auto
Adjusts the still image effect (depth)
automatically.
Manual
Manually adjust the still image effect
(depth).
NOTE
• This function can be adjusted when viewing 3D still images in
USB media mode.
• Even if you selected “Auto”, the 3D still image effect (depth)
may not be correctly adjusted depending on the 3D still
image.
• 3D still images taken in macro mode will be displayed with
excessive depth.
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
Viewing time info
This function allows you to display the elapsed time of
3D image viewing on the screen.
Item
Yes
The elapsed time is displayed in one-
hour increments after you start watching
3D images.
No
Hide the time.
3D test
This function displays 3D images for testing the 3D
operation. Clicking “Start” on the screen plays back 3D
test images.
NOTE
• If you press
B
during playback, the previous screen will be
displayed.
Enjoying 3D image viewing
LC60LE640X_EN_book.indb 73
LC60LE640X_EN_book.indb 73
9/10/2012 2:48:47 PM
9/10/2012 2:48:47 PM