Sharp Aquos LC-45G1X Operation Manual Download

Page: 70 / 72

HOW TO SET THE FACTORY PRESETS

Turn off the Display by pressing

POWER

on the Display.

Press and hold down

RESET

on the AVC System and press

POWER

on the Display to turn on the System.

All setting items (except TV channel) return to the factory presetting.

NOTE

• Running the factory presetting operation also clears the password.

You can run the Auto Installation again by using the following steps.

Turn on the power of the Display and the AVC System.

Press

MENU

. (Make sure the menu screen displays.)

Press

to select “Setup”.

Press

to select “Auto Installation”, and then press

ENTER

Press

to select “Yes”, and then press

ENTER

NOTE

• As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar

place.

The password is

LC-45G1X(E)-K

04.10.15, 10:13 AM

Summary of Contents for Aquos LC-45G1X









































































Search results

Summary of Contents for Aquos LC-45G1X

Reviews:

Related manuals for Aquos LC-45G1X

Brands by name

Popular brands

Sharp Aquos LC-45G1X, Operation Manual

Search results

Summary of Contents for Aquos LC-45G1X

Reviews:

Related manuals for Aquos LC-45G1X

Brands by name

Popular brands