Sharp AQUOS LC-40LE814E Page 45 Service Manual Download

Page: 45 / 72

LC-40/46LE814/824E/RU (1st Edition)

5 – 14

[2] LED flashing specification at the time of the error

Display method

• Refer to Table 1.

• LED that can be used is only one of the central icons.

This expresses the error situation by combining blinking at low speed and blinking at high speed.

• For this model, the blinking pattern displayed first is only a low-speed blinking.

This expresses

a rough content of the error.

• For this model, details are displayed by high-speed blinking by pushing remote control MENU key.

This expresses

details of the error.

Details are distinguished by the blinking frequency.

• It doesn't return to the outline display again (blink at low speed) by pushing the MENU key (The toggle is not done).

Please confirm “MONITOR ERR CAUSE” of the adjustment Process mode (1/21), when the error doesn't reproduce by having returned from the
error.

• The process of the upgrade is expressed by the brightness of point LED that smoothness changes.

• The upgrade completion is expressed by the LED brightness that changes in a staircase pattern.

LED flashing method

<Examination for a rough content of the error>

<Examination for details of the error>

<Upgrade executing>

<Upgrade completion>

Central icons

By pushing remote control MENU key.

400ms

1600ms

OFF

Central icons

1600ms

300ms

100ms

400ms

1600ms

OFF

Central icons

500ms

OFF

Central icons

1000ms

OFF

Summary of Contents for AQUOS LC-40LE814E









































































Search results

Summary of Contents for AQUOS LC-40LE814E

Reviews:

Related manuals for AQUOS LC-40LE814E

Brands by name

Popular brands

Sharp AQUOS LC-40LE814E, Service Manual

Search results

Summary of Contents for AQUOS LC-40LE814E

Reviews:

Related manuals for AQUOS LC-40LE814E

Brands by name

Popular brands