Sharp AQUOS LC-40LE814E Page 31 Service Manual Download

Page: 31 / 72

LC-40/46LE814/824E/RU (1st Edition)

4 – 19

6. The caution for update showes up.

• The picture will temporary go dark until the software update display apeeares

• Wait several minutes and don't unplug the AC cord

Select OK when if there is no problem.

7. Software update starts.

Please wait for a while until the bar shows 100%

NOTE: Do not take out the USB memory device during updating.

8. When all the procedures are complete, the following upgrade success screen shows up.

The new software version can be confirmed on screen.

After a while, Turn off power and boot-up automatically.

NOTE: TV is restarted automatically, the AC code need not be pulled out.

9. After boot-up, the following caution shows up.

Select OK when if there is no problem.

Software update is completed, please remove the USB memory device.

NOTE: Then get the set started and call the process adjustment screen 1/21 to check the main software version.

LExxx

Now Updating
Don't unpluged AC cord
update version xxxxxxx

xx %

Menu(Setup

Software Update)

LExxx

Software Update Complete

xxxxxxx

Menu(Setup

Software Update)

system software was

succesfully updated

Remove the USB memory device.

Summary of Contents for AQUOS LC-40LE814E









































































Search results

Summary of Contents for AQUOS LC-40LE814E

Reviews:

Related manuals for AQUOS LC-40LE814E

Brands by name

Popular brands

Sharp AQUOS LC-40LE814E, Service Manual

Search results

Summary of Contents for AQUOS LC-40LE814E

Reviews:

Related manuals for AQUOS LC-40LE814E

Brands by name

Popular brands