Sharp AQUOS LC-37HV4M Operation Manual Download

Page: 74 / 75

HOW TO SET THE FACTORY PRESETS

Press and hold down

CLEAR

on the AVC System while it is in standby mode. Then press

(STANDBY/ON)

button on the Display or

on the remote control unit to turn the System on.

All setting items (except TV channel) return to the factory presetting.

NOTE

• Running the factory presetting operation also clears the password.

You can run the Auto Installation again by using the following steps.

Turn on the power of the Display and the AVC System.

Press

MENU

. (Make sure the menu screen displays.)

Press

to select “Setup”.

Press

ENTER

NOTE

• If the password setting screen displays, you need to enter your password.
• If you forget your password, refer to HOW TO SET THE FACTORY PRESETS above.

Press

to select “Auto Installation”.

Press

ENTER

NOTE

• As a precautionary measure, make a note of your password above, scissor it from this manual, and keep it in a familiar

place.

The password is

Summary of Contents for AQUOS LC-37HV4M












































































Search results

Summary of Contents for AQUOS LC-37HV4M

Reviews:

Related manuals for AQUOS LC-37HV4M

Brands by name

Popular brands

Sharp AQUOS LC-37HV4M, Operation Manual

Search results

Summary of Contents for AQUOS LC-37HV4M

Reviews:

Related manuals for AQUOS LC-37HV4M

Brands by name

Popular brands