42
Using external equipment
AVC System (rear view)
VCR
Watching a VCR image
Connecting a VCR
You can use the INPUT 2 terminal when connecting a VCR and other audiovisual equipment.
Displaying a VCR image
To watch a VCR image, select “INPUT2” from the
“INPUT SOURCE” menu using
b
on the remote
control unit or
INPUT
on the Display.
Then select “INPUT2” on “Input Select” in the menu to
set the correct input signal type. (See page 51.)
The setting is stored and can be selected in the “INPUT
SOURCE” menu.
NOTE
• Each time
b
is pressed, the input source toggles.
• If the VCR image does not come in clearly, you may need
to change the input signal type setting on the “Input Select”
menu.
• Refer to your VCR operation manual for the signal type.
S-video cable
(commercially available)
TV MENU
Option
Input Select
AUTO
S-Video
Video
INPUT SOURCE
TV
INPUT1
INPUT2
INPUT3
INPUT4
PC
(For INPUT2 signal)
AV cable (commercially available)
