Sharp AQUOS LC-37HV4E Operation Manual Download Page 55

Page: 55 / 78

Useful adjustment settings

Colour system setting (for TV/AV
input mode)

u can change the colour system to one that is

compatible with the image on the screen.

Press

MENU

and the TV MENU screen

displays.

Press

to select “Option”.

• Option menu displays.

Press

to select “Colour System”, and

then press

ENTER

TV MENU

Option

Audio Out

Input Select

Cool Climate

Colour System

[Off]

[Fixed]

[AUTO]

Press

to select a compatible video

signal system of your equipment, and then
press

ENTER

• Some items may be greyed out. They are not

selectable.

TV MENU

Option

Colour System

AUTO

PAL

SECAM

NTSC 3.58

NTSC 4.43

PAL-60

NOTE

• Factory preset value is “AUTO”.
• If “AUTO” is selected, colour system for each channel is

automatically set. If an image does not display clearly,
select another colour system (e.g. PAL, NTSC 4.43).

• This function is available for AV input mode and TV tuner

mode.

AV mode selection

AV mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.

AV MODE: STANDARD

AV MODE: DYNAMIC

AV MODE: MOVIE

AV MODE: GAME

AV MODE: USER

AV MODE: STANDARD

AV MODE: USER

Press

AV MODE

again before the mode

displayed on the screen disappears.

• The mode changes as shown below.

Description

For a highly defined image in a normally
bright room

For a clear-cut image emphasising high
contrast for sports viewing

For a movie

Lowers image brightness for easier viewing.

Allows the user to customise settings as
desired. You can set the mode for each
input source.

Selected item

STANDARD

DYNAMIC

MOVIE

GAME

USER

Press

AV MODE

• Present AV mode displays.

AV input mode

PC input mode

Summary of Contents for AQUOS LC-37HV4E















































































Search results

Summary of Contents for AQUOS LC-37HV4E

Reviews:

Related manuals for AQUOS LC-37HV4E

Brands by name

Popular brands

Sharp AQUOS LC-37HV4E, Operation Manual

Search results

Summary of Contents for AQUOS LC-37HV4E

Reviews:

Related manuals for AQUOS LC-37HV4E

Brands by name

Popular brands