Sharp AQUOS LC-37BG1E, Operation Manual

Page: 21 / 42

19
Menu operations
Other menu items
Some of the useful features can be directly called up by
pressing assigned buttons on the remote control.
AV mode
AV mode gives you fi ve viewing options to choose from
to best match the system environment, which can vary
due to factors like room brightness, type of programme
watched or the type of image input from external
equipment.
Press AV MODE .
• The AV mode menu
displays.
Press AV MODE or
a
/
b
while the AV mode menu
displays on the screen.
• As you toggle down
the options, each is
immediately refl ected on the screen. No need to
press
OK .
1
2
AV mode
SOFT
ECO
DYNAMIC
USER
STANDARD
INPUT SOURCE
Use the INPUT SOURCE screen to select/check the
external equipment connected to the terminal(s) on the
back of the TV.
To watch images from
external AV equipment,
press
b . (Page 10)
• To close the INPUT SOURCE
screen, press
b
again.
Press
a
/
b
to select the
corresponding terminal, and
then press
OK .
1
2
Status display
Press
p
, a status display appears for a few
seconds.
2 ZDF Mono
13:51
• In the top line you can see the name of the
programme. See page 18 for how to customise the
settings for the status display.
INPUT SOURCE
TV
DTV
EXT1
EXT2
EXT3
EXT4
EXT5
EXT6
Still image
You can freeze a motion picture on the screen.
Press 3 .
Press
3
again to exit still image.
NOTE
• This function may not be available depending on signal
condition.
1
2
OPC
Automatically adjusts the brightness of the screen.
Press OPC on the remote control unit to switch
the Optical Picture Control on and off.
NOTE
• When set to “on”, the TV senses the surrounding light and
automatically adjusts the backlight brightness. Make sure
no object obstructs the OPC sensor, which could affect its
ability to sense surrounding light.
• Under the factory default condition, OPC becomes active
when you select “ECO” for the AV mode.
• OPC turns off whenever an adjustment is made to the
“Backlight” setting.
• OPC can be adjusted and reset for each individual AV
mode.
NOTE
• You can adjust the factory presets given in “STANDARD”,
“SOFT”, “ECO” and “DYNAMIC”.
• You can assign different AV mode to each external input
source.
• Enhanced Picture Contrast technology detects the source
video characteristics and smoothly adjusts the screen
brightness accordingly, enabling deeper black levels.
• Enhanced Picture Contrast is activated when you turn the
OPC function off for the items “STANDARD”, “SOFT” and
“DYNAMIC” in AV mode.
STANDARD : For a highly defi ned image in a normally
bright room (Enhanced Picture Contrast: On)
SOFT : Creates a softer image. (Enhanced Picture
Contrast: On)
ECO : Reduces power consumption. (Enhanced Picture
Contrast: Off)
DYNAMIC : For a clear-cut image emphasising high
contrast for sports viewing. (Enhanced Picture Contrast:
On)
USER : Allows the user to customise settings as desired.
You can set the mode for each input source. (Enhanced
Picture Contrast: Off)
Item
LC-42BG1E_gb_b.indd 19 LC-42BG1E_gb_b.indd 19 2007/05/23 13:49:37 2007/05/23 13:49:37