Sharp Aquos LC-32WD1E, Operation Manual

Page: 24 / 38

22
To enter and operate the digital TV on-screen display
menus, use the following buttons on the remote control.
The DTV on-screen display menus operate in a similar
manner to the main on-screen display menus (except the
exact colouring differs slightly). (See page 11.)
1
Press DTV to access DTV mode.
2
Press DTV MENU to open the DTV on-screen display
menus.
3
Press S / T to select the desired menu, and then press
OK.
•
Press S / T / W / X and OK to move through the on-
screen display menus and modify settings. Some
menu operations differ depending on the item you
are going to adjust. See the specific instructions in
this section for more information.
The Timer setting allows you to set the TV to automatically
tune to a digital TV-event when its on-air time begins.
Use this feature to automatically output audio and video
through the SCART connection for recording purposes.
1
Press DTV MENU .
2
Press S / T to select Timer , and then press OK.
• The currently programmed TV-event timers are
displayed.
3
Press the coloured button to complete the desired
task.
•
YELLOW — Delete or cancel the selected timer.
Press S / T to select the desired timer and then
press the Yellow button to delete it. Press
GREEN to confirm.
• GREEN — Add a new timer. See “New Timer”.
• BLUE — Edit a timer. Press S / T to select the
desired timer and then press the BLUE button to
edit it. See “New Timer” step 3.
DTV menu operations
Press to display the subtitle selection screen.
Press to display teletext or the MHEG5
presentation, if available. If both are available,
press for MHEG5. Press for 1-2 seconds for
teletext.
0–9 Press for direct channel entry.
DTV Switches between analogue TV mode and
digital TV mode.
EPG Press to open the EPG (Electronic
Programme Guide) screen.
ESG Press to open the ESG (Electronic Service
Guide) screen.
RADIO Press to switch between TV and RADIO.
Press to open the multi audio screen.
DTV
MENU Press to open or close the DTV Main Menu
screen.
Press to open the service banner or view
detailed information from the EPG/ESG
screen.
S
/
T
/
W
/
X
Press to move through the on-screen display
menu, select an item on the screen, or adjust
an item.
OK Press to select or execute a highlighted item.
Press to access the programme list.
END Press to exit the on-screen display menus.
Colour Each of the coloured buttons have a unique
function assigned in the menu screen.
RETURN Press to return to the previous menu.
Using the on-screen display
Common Operations
Timer
Page 22 of 204 June 8, 2007
TINS-DO52WJN1
SHPRN000205B-GLDN