28
Basic adjustment settings (Analogue)
3
Press
a
/
b
/
c
/
d
to select the channel you
want to edit, and then press
OK
.
• The selected channel information displays.
Press
a
/
b
to select “Skip”, and then press
OK
.
• Skip menu displays.
1
2
MENU
[Setup ... Programme Setup ... Manual Adjust]
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
Booster
[Off]
Off
On
Skip menu
Press
a
/
b
to set “Skip” to “On”, and then
press
OK
.
Setting the decoder
When connecting a decoder to the unit, you need to
assign the terminal input.
Press
a
/
b
/
c
/
d
to select the channel you
want to edit, and then press
OK
.
• The selected channel information displays.
1
3
Press
a
/
b
/
c
/
d
to select the channel you
want to edit, and then press
OK
.
• The selected channel information displays.
Press
a
/
b
to select “Lock”, and then press
OK
.
• Child lock menu displays.
1
2
NOTE
• See page 78 for setting PIN.
• When “Lock” is set to “On” for a channel, “Child lock has
been activated.” displays , and the image and sound of
the channel is blocked.
• When pressing
OK
while “Child lock has been activated.”
displays, PIN input menu will display. Inputting the correct
PIN lifts the child lock temporarily until the power is turned
off.
Setting the child lock
You can block the viewing of any channel.
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
Booster
[Off]
Off
On
Lock menu
Press
a
/
b
to set “Lock” to “On”, and then
press
OK
.
NOTE
• “Off” is factory preset value.
• “INPUT1” is the recommended selection.
Channels with “Skip” set to “On” are passed over when
using
P
r
/
P
s
even if selected while watching the
image from the TV.
3
Press
a
/
b
to set “Decoder” to “INPUT1”,
“INPUT2” or “INPUT3”, and then press
OK
.
Manual setting for each channel (continued)
Skipping channels
Press
a
/
b
to select “Decoder”, and then
press
OK
.
• Terminal inputs information displays.
2
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
Booster
[Off]
Off
INPUT1
INPUT2
INPUT3
Decoder menu
3
Press
a
/
b
/
c
/
d
to select the channel you
want to edit, and then press
OK
.
Press
a
/
b
to select “Booster”, and then
press
OK
.
• Booster menu displays.
1
2
Setting the booster
Picture quality may improve in regions with weak signal
strength using this function.
Fine
Colour sys.
Sound sys.
Label
Skip
Decoder
Lock
[179.25]
[AUTO]
[B/G]
[Off]
[SAT.1]
[Off]
[Off]
Booster
[Off]
Off
On
Press
a
/
b
to set “Booster” to “On”, and then
press
OK
.
NOTE
• If signal strength is strong enough for the selected
channel, the effect is negligible and may produce
instability. In such case, select “Off”.
Booster Menu
LC-32GD1E(E)-c
04.4.6, 1:39 PM
28
