19
Display
AVC System
Turning on the power
Make sure that the system cable is connected before turning
on the power.
STANDBY/ON indicator
POWER (
B
B
B
B
B
)
MAIN POWER
(
X
X
X
X
X
)
STANDBY/ON indicator (
B
)
STANDBY/ON button (
B
)
1
2
Turning off the power
Press
B
on the remote control unit or STANDBY/ON button
(
B
) on the Display or AVC System.
• The System enters standby mode and the image on the screen
disappears.
• Both STANDBY/ON indicators change from green to red.
Press
MAIN POWER (
X
X
X
X
X
)
on the Display.
• The STANDBY/ON indicator on the Display gradually turns off.
• When the System is turned off by
MAIN POWER (
X
X
X
X
X
)
, you cannot
turn on the power by pressing
B
on the remote control.
NOTE
• If you are not going to use this System for a long period of time, be sure to
remove the AC cords from the power outlet.
• Weak electric power is still consumed even when both
MAIN POWER (
X
X
X
X
X
)
and
POWER (
B
B
B
B
B
)
are turned off.
• In DTV input mode, if the power is turned off immediately after a setting
change from the menu screen, the new setting or channel information
may not be memorised.
Watching TV
Press
MAIN POWER (
X
X
X
X
X
)
on the Display.
• STANDBY/ON indicator (Green): The System is on. (After
a few seconds, programme information appears with
sound.)
• STANDBY/ON indicator (Red): The System is in standby.
(Go to step 2.)
Use any of the methods below to power on. Powering
on changes the LED from red to green.
• Press the
STANDBY/ON
button (
B
) on the Display.
• Press
POWER
(
B
) on the AVC System.
• Press
B
on the remote control.
NOTE
• The initial auto installation starts when the System powers on for the first
time. If the System has been turned on before, the initial auto installation
will not be invoked. See page 25 to try Auto installation from the Setup
menu.
STANDBY/ON indicator
Power off
The System is in standby mode.
Indicates the side lighting up green is on.*
Off
Red
Green
NOTE
• Check if the system cable is connected properly when display indicator flashes red.
CAUTION
* If only the STANDBY/ON indicator on the AVC System lights up green, this indicates that the System is in
Software Download mode (see pages 44 and 45).
Do not disconnect the AC cords or switch off MAIN POWER (
X
X
X
X
X
) on the
Display under this condition.
LC-32GD1E(E)-b
04.4.6, 1:37 PM
19
