Sharp Aquos LC-32GA3H Operation Manual Download Page 18

Page: 18 / 63

Watching TV

Simple button operation for changing
volume/sound

Changing the volume

You can change the volume on the TV or on the remote
control unit.

NOTE

• “TV”, “INPUT1”, “INPUT2”, “INPUT3” and “INPUT4” modes

can store volume adjustment values separately.

Audio status

When “Audio Out” is set to “Variable”, the indicator on
the screen changes as shown below.

Output device

Variable sound

Audio out

Variable

Fixed

Variable sound

Constant as

specified

Mute

Speaker

MONITOR
OUTPUT

NOTE

• See page 44 for details on the audio out function.

• To increase the volume, press

VOL

• To decrease the volume, press

VOL

Using

(Mute) on the remote control unit

mutes the current sound output.

Press

• The sound is silenced.
• “

” has been displayed on the screen for 30

minutes.

Mute

NOTE

• Within 30 minutes after pressing

, press one of the

buttons below to cancel the mute.

—

VOL

—

•

Mute will be cancelled after 30 minutes. However, the
TV will not suddenly output loud sound as the volume
level will be set to 0 automatically. Increase the volume
level by pressing VOL

Press

again within 30 minutes to cancel

the mute.

• Before 30 minutes, the volume level returns to

the previous setting.

LC-32_37GA4X(E)-b

04.9.17, 7:43 AM

Summary of Contents for Aquos LC-32GA3H
































































Search results

Summary of Contents for Aquos LC-32GA3H

Reviews:

Related manuals for Aquos LC-32GA3H

Brands by name

Popular brands

Sharp Aquos LC-32GA3H, Operation Manual

Search results

Summary of Contents for Aquos LC-32GA3H

Reviews:

Related manuals for Aquos LC-32GA3H

Brands by name

Popular brands