Sharp Aquos LC-32GA3H Operation Manual Download Page 15

Page: 15 / 63

Watching TV

POWER indicator

Power off

The TV is in standby mode.

The TV is on.

Off

Red

Green

Turning on the power

Press

POWER

on the TV.

• POWER indicator (Green): The TV is on. (After a few seconds, an image

appears with sound.)

• After turning the power “ON” by pressing

POWER

on the TV, you can turn

the power ON/OFF by pressing

POWER

on the remote control.

Turning off the power

Press

POWER

on the remote control.

• The TV enters standby mode and the image on the screen disappears.
• The POWER indicator on the TV changes from green to red.

Press

POWER

on the TV.

• The POWER indicator on the TV turns off.
• When the TV is turned off by

POWER

, you cannot turn on the power by

pressing

POWER

on the remote control.

NOTE

• If you are not going to use this TV for a long period of time, be sure to

remove the AC cord from the power outlet.

• Weak electric power is still consumed even when

POWER

is turned off.

POWER

indicator

POWER

button

POWER

button

LC-32_37GA4X(E)-b

04.9.17, 7:42 AM

Summary of Contents for Aquos LC-32GA3H
































































Search results

Summary of Contents for Aquos LC-32GA3H

Reviews:

Related manuals for Aquos LC-32GA3H

Brands by name

Popular brands

Sharp Aquos LC-32GA3H, Operation Manual

Search results

Summary of Contents for Aquos LC-32GA3H

Reviews:

Related manuals for Aquos LC-32GA3H

Brands by name

Popular brands