Sharp Aquos LC-32GA3H Operation Manual Download Page 40

Page: 40 / 63

Useful adjustment settings

AV mode selection

AV mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.

Press

AV MODE

again before the mode

displayed on the screen disappears.

• The mode changes as shown below.

Press

AV MODE

• Present AV mode displays.

NOTE

• You can select a different AV MODE item for each input

mode. (For example, select STANDARD for TV input and
DYNAMIC for VIDEO input.)

AV MODE: STANDARD

AV MODE: DYNAMIC

AV MODE: MOVIE

AV MODE: GAME

AV MODE: USER

AV MODE: STANDARD

AV MODE: USER

AV input mode

PC input mode

Description

For a highly defined image in a normally
bright room

For a movie

Lowers image brightness for easier viewing.

Allows the user to customise settings as
desired. You can set the mode for each
input source.

For a clear-cut image emphasising high
contrast for sports viewing

Selected item

STANDARD

MOVIE

GAME

USER

DYNAMIC

Wide screen signalling (WSS) (for
TV/AV input mode)

WSS allows a television to switch automatically among
the different screen formats.

Press

MENU

and the MENU screen displays.

Press

to select “WSS”, and then press

ENTER

Press

to select “Setup”.

Press

to select “On” or “Off”, and then

press

ENTER

NOTE

• Try to set WIDE mode if an image does not switch to the

correct screen format. When the broadcast signal contains
no WSS information, the function will not work even if
enabled.

• This function is available for AV input mode and TV tuner

mode.

Picture aspect ratio (for TV/AV input
mode)

The WSS signal has 4:3 auto-switching that allows you
to select between Normal and Panorama.

Press

MENU

and the MENU screen displays.

Press

to select “4:3 Mode”, and then

press

ENTER

Press

to select “Normal” or

“Panorama”, and then press

ENTER

WSS signal 4:3 screen

4:3 mode “Normal”

4:3 mode “Panorama”

Press

to select “Setup”.

Description

Normal range keeping 4:3 or 16:9 aspect
ratio

Wide image without side bars

Selected item

Normal

Panorama

LC-32_37GA4X(E)-g

04.9.17, 7:51 AM

Summary of Contents for Aquos LC-32GA3H
































































Search results

Summary of Contents for Aquos LC-32GA3H

Reviews:

Related manuals for Aquos LC-32GA3H

Brands by name

Popular brands

Sharp Aquos LC-32GA3H, Operation Manual

Search results

Summary of Contents for Aquos LC-32GA3H

Reviews:

Related manuals for Aquos LC-32GA3H

Brands by name

Popular brands