background image

12

Picture menu

TitleB

Menu operations

MENU    

[Picture]

Picture

Audio

Contrast

OPC

AV Mode

[STANDARD]

[Off]

Brightness

Colour

Tint

Sharpness

Advanced

Reset

[+30]

[0]

[0]

[0]

[0]

0

–30

–30

–30

–10

+40

+30

+30

+30

+10

Backlight

[+6]

–8

+8

Off:

 The brightness is fixed at the value set in Backlight.

On:

 Automatically adjusts

On(Display):

 Displays the OPC effect on the screen while

adjusting the brightness of the screen.

OPC

Menu Operation: A (page 11)

Automatically adjust the brightness of the screen.

NOTE

• When set to “On”, the TV senses the surrounding light

and automatically adjusts the backlight brightness. Make
sure no object obstructs the OPC sensor, which could
affect its ability to sense surrounding light.

NOTE

• You can adjust the factory preset parameters given in

“STANDARD”, “SOFT”, “ECO” and “DYNAMIC”. The
parameters chosen affect each of the input sources.

• The items marked with * are only available for TV/AV input

mode.

STANDARD:

 For a highly defined image in a normally

bright room

SOFT*:

 Creates a softer image.

ECO*: 

Reduces power consumption.

USER:

 Allows the user to customise settings as desired.

You can set the mode for each input source.

DYNAMIC*:

 For a clear-cut image emphasising high

contrast for sports viewing

AV Mode

Menu Operation: A (page 11)

AV Mode gives you five viewing options to choose from
to best match the system environment, which can vary
due to factors like room-brightness, type of programme
watched or the type of image input from external
equipment.

Advanced

Menu Operation: C (page 11)

This TV provides various advanced functions for
optimising the picture quality.

Colour Temp.

Black

3D - Y/C

Monochrome

Film Mode

I/P Setting

High

Mid-High

Middle

Mid-Low

Low

TV/AV only

Item

Item

Picture adjustments

Menu Operation: B (page 11)

Adjust the picture to your preference with the following
picture settings.

Adjustment items for AV source

c

 button

d

 button

Backlight

The screen dims

The screen
brightens

Contrast

For less contrast

For more contrast

Brightness

For less brightness

For more
brightness

Red

For weaker red

For stronger red

Green

For weaker green

Blue

For weaker blue

For stronger blue

Selectable
items

For stronger
green

c

 button

d

 button

Backlight

The screen dims

The screen
brightens

Contrast

For less contrast

For more contrast

Brightness

For less brightness

For more
brightness

Colour

For less colour
intensity

For more colour
intensity

Tint

Skin tones
become purplish

Sharpness

For less sharpness

For more
sharpness

Selectable
items

Skin tones
become greenish

Adjustment items for PC source

LC-32GA8E_GB_b

06.4.28, 10:19 AM

12

Summary of Contents for Aquos LC-32BV8E





























Reviews: