29
To ensure that your DVB receiver is always up-to-date and state-of-the-
art, new software versions will be provided via the broadcaster from time
to time which can be beamed directly to your device and can be installed
automatically.
Automatic software detection
Your device can
fi
nd out when new software versions are available. This
happens at night, when your EPG is automatically updated. To enable
this update to take place, your TV set simply needs to remain in standby
mode.
If a new software version has been found, an on-screen message will
inform you accordingly next time you switch the TV on:
You can decide whether you wish to download the new software or not.
Con
fi
rm with
OK
to start the download and install process for the new
software, which will be transmitted by satellite.
You can
fi
nd out more in the section “Downloading the software”.
Searching for new software
If you want to carry out a manual search for an update software, proceed
as follows:
Press the
MENU
button to call up the TV menu.
Con
fi
rm the line marked “Setup” with
OK
.
Con
fi
rm the line marked “Miscellaneous” with
OK
.
Select the entry marked “DVB software” and press
OK
.
TV menu -> Setup -> Update digital TV software
Current Version: V4.0.0
You can search for a new software version with OK
If you start the search with
OK
, a check is performed to see if a new
software version is available.
If a new version is available, an on-screen message will appear.
TV menu -> Setup -> Update digital TV software
Current Version: V4.0.0
New Version: V4.1.0
1.
2.
3.
4.
5.
6.
Downloading the software
If you now press
OK
in the dialog box shown above, you can decide
whether you want to download the software straight away, or when
you switch the TV off, or not at all.
We recommend that you always update your digital software. This is
the only way to ensure that your device is always up to date.
If you have chosen to download the software, the software on your
device will be con
fi
gured and you will be informed of the download’s
progress by a grey bar and a counter.
Do not switch your device off during the download! The download
process can last up to an hour. Once
fi
nished, a message will ap-
pear informing you that the download process is completed.
Once you have updated the software, you will be prompted to turn off
your TV set with the ON/Standby switch and turn it back on again.
If you did not download the update, you will be asked again when you
switch the TV on whether you wish to continue with the update process.
1.
2.
3.
Installing new software