![background image](http://html.mh-extra.com/html/sharp/aquos-lc-26dv28ut/aquos-lc-26dv28ut_operation-manual_373829010.webp)
8
Remote control unit
(×1)
Page 10
“AA” size battery (×2)
Page 10
AC cord (×1)
Page 9
Stand unit (×1)
Page 8
Operation manual (×1)
NOTE
• Always use the AC cord supplied with the TV/DVD.
Supplied accessories
Make sure the following accessories are provided with the product.
QUICK REFERENCE
Attaching the stand
Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
Before performing work spread cushioning over the base area to lay the TV/DVD on. This will prevent it from being damaged.
•
•
CAUTION
Attach the stand in the correct direction.
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV/DVD falling over.
•
•
1
Confirm the 8 screws supplied with the TV/DVD.
Short screws (
X
4)
(used in step 2)
Long screws (
X
4)
(used in step 3)
2
Remove the covering sheet of the stand.
1
Attach the base to the post.
2
Attach the base to the 4 screws into the 4 holes on the
bottom of the base.
Hex key
Screw
3
1
Insert the stand into the openings on the bottom of the
TV/DVD.
2
Insert and tighten the 4 screws into the 4 holes on the
rear of the TV/DVD.
Soft cushion
Hex key
Screw
4
For protection, sheets
are covering the product.
Please remove these
sheets before use.
NOTE
• To detach the stand, perform the step in reverse order.
(Illustration is LC-26DV28UT.)
54P0331A.indb 8
54P0331A.indb 8
19/4/2553 10:24:28
19/4/2553 10:24:28
Summary of Contents for AQUOS LC-26DV28UT
Page 2: ......