background image

41

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or 

customer assistance, please call 1-800-BE-SHARP.

Calling for Service

LIMITED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the 
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, 
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the 
purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has 
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This 
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely 
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product 
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may 
vary. Please contact 

1-888-GO-SHARP

 for further information.

In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of 
purchase to the servicer, which proof must include the date of purchase. 

To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or 
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR 
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE 
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF 
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS 
WHICH VARY FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy 
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are 
permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all 
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims, 
whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way
responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence, 
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the 
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp 
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on 
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Specific Section

Where to Obtain Service:

From a Sharp Authorized Servicer located in the United States. To find the 
location of the nearest Sharp Authorized Servicer, please call Sharp toll free 
at 1-800-BE-SHARP.

What to do to Obtain Service:  

LC-32DV28UT

LC-26DV28UT

TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 

1-800-BE-SHARP

 

OR VISIT www.sharpusa.com

Additional Exclusions from 
Warranty Coverage (if any):

In order for the Product to be serviced, the Product must be readily available 
to the servicer, free and clear of any complex or non-standard installation, 
mounting or other encumbrance which would unreasonably interfere with 
servicing the Product. The Servicer will remount the Product after service, 
provided that such remounting is not into a complex or non-standard installa-
tion. Any additional labor and materials required to remove and/or reinstall a 
Product above and beyond the foregoing are not covered by this warranty, 
may result in additional charges and are the responsibility of the consumer.
Image Retention resulting from a fixed image being displayed for long 
periods of time is not covered by this Limited Warranty (see Operation 
Manual on how to prevent this).

Warranty Period for this Product:

One (1) year parts and labor from the date of purchase.

Your Product Model Number & Description:

LC-26DV28UT/LC-32DV28UT Combination Liquid Crystal Television And 
DVD/CD player
(Be sure to have this information available when you need service for your 
Product.)

Contact your Sharp Authorized Servicer to obtain in home service for this 
product. The Servicer will come to your location and if necessary remove the 
unit for repair at the Servicer’s facility and return the set to you once 
completed. Be sure to have 

Proof of Purchase

 available. 

Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure
to have proof of purchase available. If you ship the Product, be sure it is 
insured and packaged securely. Please use two persons to carry the Product,
transport it in its original packaging, and ensure that the Product is covered 
to avoid scratches and damage. Sharp shall not be responsible for lost, 
stolen or misdirected mail or for damage to the product incurred during 
shipping.

54P0331A.indb   41

54P0331A.indb   41

19/4/2553   10:24:51

19/4/2553   10:24:51

Summary of Contents for AQUOS LC-26DV28UT












































Reviews: