13
Preset (Continued)
■
Setting a channel to a desired TV station:
Upper control panel
4
1, 2, 6
3
Press
MENU
(PRESET-
1
) on the upper part of the
LCD TV set for more than 2 seconds. The AUTO
mode screen appears.
A u t o ( B / G )
V H F 1
4 8 . 2 5 M H z
Press
MENU
(PRESET-
1
) to display the MANUAL
mode screen. Press
MENU
(PRESET-
1
) again to
change the MANUAL mode as shown below.
Select the channel position using
Channel Select
or
CH (
)/(
)
.
M a n u a l ( B / G )
V H F 1
4 8 . 2 5 M H z
Press
VOL (+)/(–)
to locate the channel you want to
preset to the position. Search is initiated and when a
TV signal is received during the search, the search
stops.
Repeat steps
3
and
4
above, to preset the channel
positions for other broadcasts, etc.
M a n u a l ( B / G )
U H F 5
6 2 3 . 2 5 M H z
Press
MENU
(PRESET-
1
) to return to the normal
screen.
NOTE
•
SYSTEM may not have been set correctly, if noise can be heard or
if there is no sound. In such case, reset to “Sound system” using
MENU
(See page 14).
Presetting the Channels (MANUAL)
■
In a weak reception area, or under bad reception
conditions.
Upper control panel
4
1, 2, 3, 5
Press
MENU
(PRESET-
1
) on the upper part of the
LCD TV set for more than 2 seconds. The AUTO
mode screen appears.
Press
MENU
(PRESET-
1
) to display the MANUAL
mode screen.
While the MANUAL mode screen is displayed, press
MENU
(PRESET-
1
) for more than 2 seconds.
The channel position number remains in green.
Adjust for good reception using
VOL (+)/(–)
.
After finishing the adjustment, press
MENU
(PRESET-
1
) to continue channel presetting.
NOTE
•
While the MANUAL mode screen is displayed, press
MENU
(PRESET-
1
).
(The LANGUAGE mode screen will appear.)
M a n u a l ( B / G )
V H F 1
4 8 . 2 5 M H z
F i n e
U H F 5
6 2 3 . 2 5 M H z
: SELECT O K : ENTER M : BACK E : EXIT
E n g l i s h
4
6
1
2
3
4
5
Sound system
AUTO MANUAL LANGUAGE NORMAL SCREEN
5
3
2
1
LC-15_20B5H_E_P12-15.p65
04.1.30, 6:39 PM
13
