AM-900U
2 – 15
3.7.4 COM test mode
You can check the communication between the main CPU and the
printer controller on this mode. Concretely, input the command number
from the main CPU and can read the response from the printer control-
ler.
1. Operation
1. Press the [ENTER] key to enter the mode.
2. Select the mode “SR”, “EC”, “EEC”, or “ESR” using the “<“ or the
“>” key. The “>” key can be used to select the mode only when a
cursor is in the position of (a).
3. Enter the value using the numeric keys.
“SR”, “EC”, “ESR”
•
Range MIN: 00, MAX: 31
“EEC”
•
Range MIN: 00, MAX: 63
4. Press the [STOP] key to exit this mode.
3.7.5 Print size
This function is prepared for the function in the future. Now there is no
meaning.
1. Operation
4. How to make soft switch setting
To enter the soft switch mode, press the following key entries in sequence.
[ENTER]Key
SR
=
ESR
=
4: COM TEST
[>]Key
[>]Key
[>]Key
ex)[1],[2]Ke y
ex)[1],[2]Ke y
(a) cursor position
SR12
=01
ESR12
=15
EC
=
[>]Key
ex)[1],[2]Ke y
EC12
=10
EEC
, =
ex)[1],[2],[3],[4]Key
EEC12,34
= 80 13
Enter paper size on bypass tray with numeric key and press the [ENTER] key.
PRINT SIZE
Press [ENTER]Key
SIZE=215. 9x279. 4
Press MENU
9
8
7
START
Press MENU key.
Press
key.
Press
key.
Bit1 - 8 are set.
Soft SW01 - SW99 are set.
SW01 = 1 0 0 0 0 0 0 0
SW01 = 1 0 0 0 0 0 0 0
SW01 = 1 0 0 0 0 0 0 0
SW01 = 1 0 0 0 0 0 0 0
SW02 = 0 0 0 0 0 0 0 0
SW99 = 0 0 0 0 0 0 0 0
Press
key during setting.
To finish the settings halfway between
SW01 and SW99, press the STOP
key. In this case, the setting being done
to the SW No. on display will be nullified
while settings done to the preceding
SW No. remain in effect.
The soft switch mode is terminated.
SW01 = 0 0 0 0 0 0 0 0
ENTER
DATA No. 1 2 3 4 5 6 7 8
When the QUALITY key is pressed, the
contents of soft switches are printed.
ENTER
