Sharp AL-1642CS Page 79 Operation Manual Download

Page: 79 / 97

MATERIAL SAFETY DATA SHEET

Page : 2/4

Date Revised : Jul. 31, 2002
Date Issued : Jun. 1, 1998
MSDS No. F-00831

3.HAZARDS IDENTIFICATION

Most Important Hazards and Effects of the Products

Human Health Effects : There are no anticipated carcinogenic effects from exposure based on animal tests

performed using toner. When used as intended according to instructions, studies do not
indicate any symptoms of fibrosis will occur.

Environmental Effects : No data are available.

Specific Hazards

Dust explosion (like most finely divided organic powders)

Directive 1999/45/EC(Europe) :

Not classified as dangerous

4.FIRST-AID MEASURES

Route(s) of Entry : Inhalation?

Skin?

Ingestion?

Yes

Possible but very unusual.

Inhalation

Remove to fresh air. If symptoms occur, consult medical personnel.

Skin Contact :

Wash with soap and water for 15 minutes or until particle is removed.

If irritation does occur, consult medical personnel.

Eye Contact :

Flush eyes immediately with water for 15 minutes. If irritation does occur, consult medical personnel.

Ingestion

Rinse with water and drink several glasses of water. If irritation or discomfort does occur, consult

medical personnel.

5.FIRE-FIGHTING MEASURES

Extinguishing Media

Water, CO

, foam and dry chemicals

Special Fire Fighting Procedures :

None

Fire and Explosion Hazards

Toner material, like most finely divided organic powders, may form an explosive

mixture.

6.ACCIDENTAL RELEASE MEASURES

Personal Precautions

None

Environmental Precautions

None

Methods for Cleaning Up

Wipe off with paper or cloth. Do not use vacuum cleaner when a large amount is

released. It, like most finely divided organic powders, is capable of creating a
dust explosion.

7.HANDLING AND STORAGE

Handling

Technical Measures

: None

Precautions

: None

Safe Handling Advice : Use of a dust mask is recommended when handling a large quantity of toner or during long

term exposure, as with any non-toxic dust. Try not to disperse the particles.

Storage

Technical Measures

: None

Storage Conditions

: Keep container closed and Store in a cool and dry place.

Keep out of the reach of children.

Incompatible Products : None

AL-1642CS_Manual.book 77

ページ

２００５年３月１０日　木曜日　午後５時５分

Summary of Contents for AL-1642CS


































































































Search results

Summary of Contents for AL-1642CS

Reviews:

Related manuals for AL-1642CS

Brands by name

Popular brands

Sharp AL-1642CS, Operation Manual

Search results

Summary of Contents for AL-1642CS

Reviews:

Related manuals for AL-1642CS

Brands by name

Popular brands