Sharp AL-1216, Operation Manual

Page: 47 / 84

45
8
7
Begin installation of the Button Manager (This step will start if it
was selected in step 4).
1 After confirming the message in the "Welcome" window, click the
"Next" button.
2 Read the message in the "Please read the following information."
window, and then click the "Next" button.
3 When a message appears that lets you specify the location for the
software to be installed, click the "Next" button.
4
If the program displays "Do you want the Button Manager added to
Windows Startup?", check "Yes" and click the "OK" button.
The setup program will start to copy the files.
5
Click the "Finish" button when the message informs you that
setup is successful.
The Sharpdesk installer will start.
8 Begin installation of the Sharpdesk (This step will start if it was
selected in step 4).
1
After confirming the message in the "Welcome to Sharpdesk
installation" window, click the "Next" button.
2 Read the message in the "Information" window, and then click the
"Next" button.
3 When the "Choose Destination Location" window appears, click
the "Next" button.
4 When the "Select Program Folder" window appears, click the
"Next" button.
The setup program will start to copy the files.
If the dialog box asking "If you have TIF files
saved using Photoshop or Imaging for
Windows you should hit Skip" appears,
answer the question to continue the
Sharpdesk installation.
5 Click the "Finish" button when the message
informs you that Setup is complete.
9
Click the "Close" button when the
message informs you that "Setup has
finished". When the "Now connect the
MFP interface cable to the PC" dialog
box appears, click the "OK" button.
• After the installation, a message to
restart your computer may be
displayed. In this case, click the
"Yes" button to restart your
computer.
• For parallel interface connection
ensure that your computer and MFP
are turned off before connecting the
cable (p.68).