-32
"
On-screen Display (Keystone Correction mode)
KEYSTONE
button
UNDO
button
Adjustment
buttons (
'
/
"
/
\
/
|
)
Horizontal Keystone Correction
Vertical Keystone Correction
Note
•
When adjusting the Keystone setting, the placement
range is changed depending on the input signal
type.
•
Keystone correction cannot be applied to On-screen
Display.
•
When Keystone correction is applied, the resolution
of image can be deteriorated to some extent.
•
Keystone Correction is also returned to the factory
preset settings by pressing
on the remote
control.
Keystone Correction
This function can be used to adjust the Keystone
settings.
Note
•
When the image is projected from a di-
rection at an angle, the image becomes
distorted trapezoidally. The function for
correcting trapezoidal distortion is called
Keystone Correction.
1
Press
on the remote control
to enter the Keystone Correction
mode.
2
Press
'
/
"
to select “H Keystone”
or “V Keystone”.
3
Press
\
/
|
to move the mark on
the selected adjustment item to
the desired setting.
Note
•
Straight lines and the edges of the dis-
played image may appear jagged,
when adjusting the Keystone setting.
•
When adjusting “H Keystone” and “V
Keystone” at the same time, the
values of adjustable angles for each
setting become smaller.
•
The adjustable value of the “V Key-
stone” becomes extremely small
when “H Keystone” is made to be the
maximum value.
•
Keystone correction is disabled while
the picture mode is set to “SMART
STRETCH”. (See page
35
.)
4
Press
.
•
The on-screen display of the Keystone
Correction mode will disappear.
Description
Horizontally adjusts the
keystone settings.
Vertically adjusts the keystone
settings.
Returns to the factory preset
settings.
Selectable
items
H Keystone
V Keystone
Reset
Image Projection
XV-Z2000U_E_P28_35.p65
04.10.13, 0:17 PM
32
