Section 1 Basic Information
1-3
This service manual is intended for use by persons having electrical and mechanical training and a
level of knowledge of these subjects generally considered acceptable in the appliance repair trade.
Electrolux home products cannot be responsible, nor assume any liability, for injury or damage of
any kind arising from the use of this manual.
ÉßÎÒ×ÒÙ
The power supply cord contains a current device that senses damage to the power cord. To test your
power supply cord do the following:
1. Plug in the Air Conditioner.
2. The power supply cord will have TWO buttons on the plug head. Press the TEST button. You will
notice a click as the RESET button pops out.
3. Press the RESET button. Again you will notice a click as the button engages.
4. The power supply cord is now supplying electricity to the unit. (On some products this is also indi-
cated by a light on the plug head).
Notes
1. Do not use this device to turn the unit on or off.
2. Always make sure the RESET button is pushed in for correct operation.
3. The power supply cord must be replaced if it fails to reset when either the TEST button is
pushed, or it cannot be reset. A new one can be obtained from the product manufacturer.
4. If power supply cord is damaged, it CANNOT be repaired, it MUST be replaced by
one obtained from the product manufacturer.
ÉßÎÒ×ÒÙ
д«¹ ·² ú
Ю»-- ÎÛÍÛÌ
ÒÑÌÛæ ͱ³» °´«¹- ¸¿ª» ¬¸»
¾«¬¬±²- ±² ¬¸» -·¼»ò
ÎÛÍÛÌ
ÌÛÍÌ
Summary of Contents for AF-S100RX
Page 8: ......
