To recall a memorised station:
n
Preset memory scan
Press the PRESET
or
A
) button for less than 0.5
seconds to select the desired station.
The contents (preset channel number, frequency
and frequency band) which have been stored in
memory will appear in the display in numerical order,
irrespective of the frequency bands.
Note:
When searching for a memorised station, do not press
the PRESET button for more than 0.5 seconds,
When the PRESET button is pressed for more than 0.5
seconds, the unit will enter the preset memory scan
mode.
Backup function:
The backup function protects all station presets for a
few hours should there be a power failure or the AC
power lead is removed from the AC socket.
The stations saved in the preset memory can be scanned auto-
matically.
1
To scan the preset stations, press the PRESET
or
A
)
button for more than 0.5 seconds.
The station preset number flashes and programmed stations
are sequentially received for 5 seconds each.
2
Press the PRESET
or
A
) button again to stop the memory
scan at the desired station.
Note:
When the preset memory does not have any stations stored in
it, the preset memory scan will not function.
6
6
2 5
1 or TAPE 2 playback
Set the ON/STAND-BY switch to ON.
2
Press the TAPE (l-2) button.
3
Open the cassette door by pushing the area marked “PUSH
EJECT”.
4
Load the cassette into the TAPE 1 or TAPE 2 cassette com-
partment.
5
With cassettes in both decks, press the TAPE (I-2) button
to switch operation from one deck to the other.
6
Press the
button to start playback.
When playback is performed using the remote control, press
the TAPE 1 or TAPE 2 button.
To stop playback:
Press the
n
button.
Fast forward/rewind: (TAPE 2 only)
1
Press the
n
button, then press the TAPE (l-2) button to
select TAPE 2.
To advance the tape, press the
button.
To rewind it, press the
button.
Precautions:
When removing the cassette tape, press the
n
button, and
then open the cassette compartment.
l
Before changing from one tape operation to another, press
the button.
If a power failure occurs during tape operation, the tape head
will remain engaged with the tape and the cassette door will
not open. In this case, wait until power is restored.
