3D SURROUND
2
size batteries
(UM/SUM-3, R6, HP-7
or similar)
0.2 m 6 m
(8” 20’)
n
Demo mode
When the AC power lead is first connected, the unit will enter
the demonstration mode and the word
will
scroll across the display.
To cancel the demonstration mode, press the
SURROUND
button.
The 3D SURROUND button will only work when the
ON/STAND-BY switch is in the STAND-BY position.
n
Main unit operating buttons
The main unit operating
CD/Tuner/Tape.
Some buttons cannot be
is selected.
Remote control
buttons are common to all functions
used, depending on the function that
When inserting or removing the batteries, push them towards
the battery terminals.
Installing the batteries incorrectly may cause the unit to mal-
function.
Precautions for battery use:
Insert the batteries according to the direction indicated in the
battery compartment.
Replace all old batteries with new ones at the same time.
Do not mix old and new batteries.
Remove the batteries if they are weak or if the unit is not in
use for long periods to prevent potential damage due to battery
leakage.
Caution:
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
Notes concerning use:
l
Replace the batteries if control
or operation
becomes erratic.
l
Periodically clean the transmitter LED on the remote control
and the sensor on the main unit with a soft cloth.
Exposing the sensor on the main unit to strong light may in-
terfere with operation. Change the lighting or the direction of
the unit.
Keep the remote control away from moisture, excessive heat,
shock, and vibrations.
