Sharp 3800M - B/W Laser - All-in-One Operation Manual Download Page 132

Page: 132 / 152

122

TROUBLE?

Using other installed drivers

Windo

Windows 3.1x:

ws 3.1x:

Double-click the

Contr

Control P

ol P

ol Panel

anel

icon in the Main window of Program

Manager.

Double-click the

Printer

Printers

icon. The Printers window will then open.

Select

AL-F_FO

, and then click the

Connect

button.

Select

File

from the list of options in the Ports window, and then click the

button.

Select the new printer you would like to use from the list in the Installed
Printers window, and then click the

Connect

button.

Select the printer port to use for the new printer, and then click the

button.

Click the

Set As Default Printer

button, and then click the

Close

button.

Uninstalling driver

Uninstalling drivers

To use the AL-F_FO again, perform the same procedure but select
the port to be used (for example, LPT1) in step 4.

If the printer driver and the TWAIN driver are not installed correctly or if you no
longer use this machine, uninstall the printer driver and TWAIN driver from your
computer using the following procedure.

If using Windows 95/Windows 98/Windows NT 4.0, click

Star

Starttttt

Program

ogram

SHARP

AL-F_FO

, and

Uninstall AL-F_FO

If using Windows 3.1x, double-click the

SHARP AL-F_FO

icon in Program

Manager and double-click the

Uninstall AL-F_FO

icon.

When the “Confirm File Deletion” window appears, click the

Yes

button.

When the “Remove Programs From Your Computer” window appears,
click the

button.

The printer driver and the TWAIN driver are uninstalled at the same
time.

UK 13 TROUBLE LEO.p65

30/03/00, 17:43

122

Summary of Contents for 3800M - B/W Laser - All-in-One

























































































































































Search results

Summary of Contents for 3800M - B/W Laser - All-in-One

Reviews:

Related manuals for 3800M - B/W Laser - All-in-One

Brands by name

Popular brands

Sharp 3800M - B/W Laser - All-in-One, Operation Manual

Search results

Summary of Contents for 3800M - B/W Laser - All-in-One

Reviews:

Related manuals for 3800M - B/W Laser - All-in-One

Brands by name

Popular brands