Sharp 3800M - B/W Laser - All-in-One Operation Manual Download Page 125

Page: 125 / 152

115

PRINTING

Printing fr

Printing from an MS-DOS application

om an MS-DOS application

You can execute printing from an MS-DOS application which has been executed
from the MS-DOS prompt in Windows.

This printer can only print from applications run from the MS-
DOS prompt in Windows. It cannot print when running in native
MS-DOS mode.

Print setting fr

Print setting from the MS-DOS pr

om the MS-DOS pr

om the MS-DOS prompt

ompt

Windows 95/Windows 98 has the item, “Spool MS-DOS print jobs” in the port
settings. If this setting is not selected, the printer will not operate properly. Use the
following procedure to check the setting.

Click the

Star

Starttttt

button.

Select

Settings

and then click

Printer

Printers

Right-click the

AL-F_FO

icon in the printer dialog box and click

Proper

oper

operties

ties

For this description, it is assumed that the mouse is configured
for right hand operation.

Click the

Details

tab in the Properties dialog box.

Click the

Por

ort Settings

t Settings

button.

Check that “

Spool MS-DOS print jobs

” is checked in the port setting

dialog box.

UK 11 PRINTING LEO.p65

30/03/00, 17:31

115

Summary of Contents for 3800M - B/W Laser - All-in-One

























































































































































Search results

Summary of Contents for 3800M - B/W Laser - All-in-One

Reviews:

Related manuals for 3800M - B/W Laser - All-in-One

Brands by name

Popular brands

Sharp 3800M - B/W Laser - All-in-One, Operation Manual

Search results

Summary of Contents for 3800M - B/W Laser - All-in-One

Reviews:

Related manuals for 3800M - B/W Laser - All-in-One

Brands by name

Popular brands