FUEL HANDLING
1. The engine is designed to work with a fuel mixture which
contains highly flammable gasoline. Never store cans of fuel or
add fuel to the tank where the boiler, stove, open flames,
electrical sparks, welding sparks, or any other source of heat
or fire which might ignite the fuel.
2. Never smoke when you handle the unit or refuel the tank.
3. When refueling, always switch off the engine and let it cool
down. Before refueling the watchful eyes check for close to no
sparks or open flames.
Add fuel after the engine cools down
1. If you when topping up fuel spilled gasoline all spills
thoroughly with a dry cloth
2. After filling of tightly screw the fuel cap back on the tank and
then, before turning on the engine, transfer the equipment to a
distance of 3 m (and larger) from the place of performance.
TRANSPORT
1. When moving the machine, cover the cutting head when it is
necessary. Equipment and lift, giving attention to the knife to
move it to.
2. Never carry equipment over untreated roads and long
distances means of transport without draining fuel from the
tank. Doing so may occur during transport of the fuel to the tank.
SETTING
HANDLE INSTALLATION
• Install the handle on the tube shaft and tighten it in such a place that it was comfortable for you.
INSTALLATION OF A COVER DEBRIS
• The model already has this cover is mounted.
• Put the cap on the gear and tools provided by the screws.
420 774 335 397 www.sharks-shop.cz Stránka 51
