420 774 335 397 www.sharks-shop.cz Stránka 38
ASSEMBLY
For Your Safety
Warning! Remove the battery pack before adjusting or changing the moveable blade or
cleaning.
Insert/remove the battery pack
●
Always release the On/Off switch before insertion or removal of the battery pack.
●
To remove the battery pack, withdraw it from the tool while pressing the spring buttons 5 on both
sides of the cartridge.
Attention: The moving blade will move back if the moving blade is not in the fully open position
when inserting the battery pack.
Battery charging
●
The charger including the adaptor 1and the charger station 4.
●
Do not use other battery chargers. The supplied battery charger is designed for Lithium-ion
battery in your machine.
Observe correct mains voltage: The voltage of the power source must agree with the voltage
specified on the nameplate of the unit. Equipment marked with 230 V can also be connected to 220 V
or 240 V.
The Li-ion battery is protected against deep discharging by the “Electronic Cell Protection”. When the
battery is empty, the machine is switched off by means of a protective circuit: The inserted tool no
longer rotates.
WARNING: Do not continue to press the On/Off switch after the machine has been
automatically switched off. The battery can be damage.
The battery is supplied partially charged. To ensure full capacity of the battery, completely charge the
battery in the battery charger before using your power tool for the first time.
A battery that is new or has not been used for a longer period does not develop its full capacity until
after approx. 5 charging/discharging cycles.
When the machine can not rotate while the On/Off switch is pressed, then the battery has no enough
capacity and should be charged.
