420 774 335 397 www.sharks-shop.cz Stránka 34
3) Personal safety
●
Stay alert, watch what you are doing and use common sense when operating a power tool. Do not
use a power tool while you are tired or under the influence of
drugs, alcohol or medication. A moment of inattention while operating power tools may result in
serious personal injury.
●
Avoid the use of tools children, people with mental and physical disabilities or persons who are not
taking this tool knowledge, unless they have adequate supervision responsible for their safety.
●
Use personal protective equipment. Always wear eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing protection used for appropriate conditions will
reduce personal injuries.
●
Prevent unintentional starting. Ensure the switch is in the off position before connecting to power
source or battery pack, picking up or carrying the tool. Carrying power tools with your finger on the
switch or energizing power tools that have the switch on invites accident.
●
Keep tools clean and dry (particularly handle) uncouated oil, grease and other lubricants.
●
Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may result in personal injury.
●
Do not overreach. Keep proper footing and balance at all times. This enables better control of the
power tool in unexpected situations.
●
Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from
moving parts. Loose clothes, jewelry or long hair can be caught in moving parts.
4) Power tool use and care
●
Do not force the power tool. Use the correct power tool for your application. The correct power tool
will do the job better and safer at the rate for which it was designed.
●
Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be repaired.
●
Disconnect the plug from the power source or the battery pack from the power tool before making
any adjustments, changing accessories, or storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
●
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool. Power tools are dangerous in the hands of
untrained users
●
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly maintained power tools.
●
Hold power tool by insulated gripping surfaces, when performing an operation where the cutting
accessory may contact hidden wiring. Cutting accessory contacting a “live” wire
may make exposed metal parts of the power tool “live” and could give the operator an electric shock.
●
Use the power tool, accessories and tool bits, etc. In accordance with these instructions, taking into
account the working conditions and the work to be performed. Use of the power tool for operations
different from those intended could result in a hazardous situation.
5) Battery tool use and care
●
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
●
Battery charger only use the prescribed network a voltage 230 V.
●
Protect the battery before shock, frost, sun, moisture and never try to open!
●
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins, keys,
nails, screws,or other small metal objects, that can make a connection from one terminal to another.
Shorting the battery terminals together may cause burns or a fire.
●
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek
medical help. Liquid ejected from the battery may cause irritation or burns.
●
Never immerse tool or the charger in water or other liquids.
6) Service
Let your power tools repaired by an authorized service center. This will ensure safe maintenance of
the repaired power tools.
