420 774 335 397 www.sharks-shop.cz Stránka 39
●
Plug the mains plug of the adaptor 6 into a socket outlet and the adaptor plug 7 into the battery pack
5 on the charger station 8. At this time, the battery charge-control indicator 9 lights up. And then insert
the battery pack into the charger station. The battery charge-control indicator indicates the charging
progress. The indicator lights up red during the charge procedure. The battery is completely charged
when the indicator lights up green again.
Disconnect the battery charger from the mains supply when not using it for longer periods.
CHANGE THE BLADES
WARNING! Do not operate the switch before dismantling or fitting the blades, Risk of injury!
The blade can be changed rapidly and expendiently without any tools.
●
To change the blade, you must remove the Blade cover (A) at first. Follow the steps as shown in the
upper figure.
1) Hold the machine in one hand as showed in the upper figure. Lever the retainer (B) upwards with
your thumb and forefinger of another hand.
2) Hold the blade cover firmly and pull it backwards.
3) Remove the blade cover upwards.
●
Take off the blades and install another blades. After you take off the blades you will see the gear
wheels. Make sure that no dirt
、
grass
、
leaves get in the gear.
Important! If there are grasses or leaves around the gear please clean them.
Installing the hedge/shrub blades
●
Turn the gear wheel so that the middle line of the marking rib on the gear wheel is exactly positioned
downwards or upwards.
（
As shown in the upper figure
）
