SharkRF openSPOT3, User Manual, Page: 65 / 131

If Advanced mode is enabled, you can define up to 5 Wi-Fi networks (per configuration profile) to connect. If
the first configured Wi-Fi network is not available, then the openSPOT3 will try connecting to the second one. If
it's not available either, then it'll try the third one and so on. After trying connecting to all of the configured
networks, it restarts the sequence with the first network.
If Advanced mode is enabled, the Wireless scan list will have a Save button for all previously unsaved networks
instead of the Connect button. Clicking on the Save button lets you easily save the network to one of the 5
available Wi-Fi network slots.
If you are manually adding a connection to an iPhone's shared internet connection then make sure you copy and
paste the phone's Wi-Fi SSID as the iPhone uses a special apostrophe character which looks nearly the same as
the one you can enter with your keyboard, but it's different, and all characters need to match.
If the Save to all configuration profiles is active then the configured Wi-Fi networks will be saved to all profiles
and will be common between profiles.
If no networks are configured then the openSPOT3 switches to access point (AP) mode and starts broadcasting
it's own Wi-Fi network. This is indicated by the status LED:
In this case, complete the steps described in the Initialization setup section of the user manual to set a Wi-Fi
network for the openSPOT3.
Network page
65