SharkRF openSPOT3, User Manual, Page: 23 / 131

Direct ID entry
You can connect to YSFReflector servers directly if you know the desired server's ID. Select the Search & Direct
option, then select the Search & Direct button, then select the ID button. Enter the server ID and then select the
ENT button. Server IDs are 5 digit long, make sure you've entered all digits otherwise the radio won't let you
select the ENT button. Also make sure the ID starts with a # character (not all transceivers enter the # before the
ID automatically).
Categories
You can save your favorite servers by adding them to categories. The openSPOT3 will automatically switch to the
saved server's connector in case it's needed.
Adding a server
Select the server name on the main Wires-X screen (the option at the bottom). This will load the station
information screen. Select the
Add button, then select a category.
Setting up your transceiver
23