SharkRF openSPOT3, User Manual, Page: 30 / 131

openSPOT3 is connected to the selected server and is in powersave mode :
openSPOT3 is connected to the Wi-Fi network, but there's a problem with the internet connection:
The LED will show this state if the openSPOT3 is connected to a Wi-Fi network, trying to connect to the
selected server, but it can't because there's a problem with the internet connection. This error can be caused
if the router, network, or the internet service provider is using a proxy or some kind of traffic filtering which
blocks the openSPOT3 from connecting.
Upgrading Wi-Fi module firmware:
The LED may show this state for 1-2 minutes after a successful firmware upgrade, if there's a new Wi-Fi
module firmware is available and being flashed to the openSPOT3's Wi-Fi module.
Do NOT unplug the openSPOT3 during the upgrade!
Modem transmitting:
A brief yellow LED during transmission signals an invalid received packet sequence number (which means
network packet loss).
Modem trying to transmit, but an active
BCLO is preventing it:
LED states
30