4
1-800-798-7398
1
To enhance battery life, this vacuum is equipped with
an advanced feature that will shut off the vacuum
when the battery is almost fully discharged. If the
vacuum shuts off while in use, charge the unit until the
complete oval around the power button is illuminated,
indicating a full charge.
2
Charge the vacuum for 7 hours before initial use. After
initial use, each recharge will take 4 to 7 hours. A
complete oval around the power button will illuminate
for one (1) hour when the charge is complete.
3
The precision charger monitors the batteries so you
don’t have to. A complete charge can take as little as 4
hours, but may take up to 7 hours because the charger
monitors battery properties to extend battery life.
Leaving the unit charging past the complete charge
time will NOT harm the batteries.
4
If the vacuum has never been used or has not been
used for an extended period of time, it will take 3 to 5
complete charge and run down cycles to realize the full
operational time of the vacuum.
5
Do not store or charge in areas of high temperature or
humidity.
6
Use only the charge adapter supplied with this unit,
marked with “For SV1106 N series Models Only”. If
other chargers are used, the battery can fail causing
damage to the battery, to the vacuum, or to personal
property.
BATTERY RECONDITIONING
If you experience shorter run time over the life of the
vacuum, perform the following battery reconditioning
steps. These steps can also be performed as monthly
maintenance for maximum battery life.
1
Charge the vacuum for a minimum of 7 hours.
2
Run the vacuum until it turns itself off.
3
Charge the vacuum for a minimum of 7 hours.
BATTERY REMOVAL, REPLACEMENT AND DISPOSAL
The cordless vacuum is powered by Ni-Mh batteries, which
must be recycled or disposed of properly in accordance
with state, federal and local laws. If uncertain as to how
to remove the battery pack, we suggest that you take your
vacuum to a reputable small appliance service technician to
have this service performed.
BATTERY REMOVAL
1
Ensure that the unit is Off.
2
Never open the battery compartment except to replace
or dispose of the battery pack.
3
The battery door is on the bottom of the floor nozzle.
Turn the unit over and push the sliding tab located next
to the battery door to the unlock position. Slide and lift
the battery door off of the nozzle.
4
Remove the battery.
5
Grasp the white connector terminals and push down
on the lever with your thumb. Pull to disconnect.
BATTERY REPLACEMENT
1
Push the connector terminals together until they click
into place.
2
Replace the new battery pack into the battery
compartment, taking care to tuck the wiring
completely in so that the wiring does not interfere with
the battery access door.
3
Place the battery door onto the bottom of the nozzle,
slide it back into place and move the sliding tab next to
the door to the lock position.
CAUTION:
• Use only with battery pack supplied.
• Never use ordinary batteries for replacement as these
may leak and damage your vacuum.
• Do not attempt to remove the battery pack from the
unit to charge.
• Never throw the battery pack or the appliance into a
fire or incinerate it.
• Do not remove or damage the battery casing.
• Do not place the batteries on metal surfaces.
• Do not touch metal parts of the batteries together as
the batteries will overheat.
MAXIMIZING THE LIFE OF YOUR BATTERY
Call customer service at 1 (800) 798-7398 or visit our web site at www.sharkclean.com to order a replacement battery pack.
