Shark SKWAL 2 Owner'S Manual Download Page 9

16

17

A

2

2

1

1

VENTILATIONS

VENTILATION INSIDE THE HELMET.

The upper air intake (Fig. A) allows air to enter onto 
the upper part of the head and thus renew the air in 
the head section.  The channels incorporated in the 
internal shock absorbers facilitate the circulation of 
air over the surface of the head.
The quality and design of the textile comfort parts 
contribute to the proper distribution of air.  The posi-
tion of the upper ventilation system is designed to op-
timise the effectiveness of its intake of air.  Depending 
on the type of your motorbike, the fairing may reduce 
the effectiveness of this ventilation.
The ventilation is in the open position when the 
tongue is pushed backwards

 

(1)

 

and closed when the 

tongue is pushed forwards 

(2)

.

LOWER VENTILATION.

The principal function of this air intake is to direct a 
flow of fresh air over the interior surface of the visor in 
order to limit the risk of misting.  The fresh air diffused 
cuts off contact with the hot air emitted by breathing 
or even by the head inside the helmet.
To open 

(1) 

or close 

(2) 

the lower ventilation, press 

the button as indicated.

WARNING! Do not open or close any vents 
while operating your motorcycle.  You could 

lose control of your motorcycle, resulting in an 
accident, personal injury or death.

AERODYNAMICS AND ACOUSTICS

The SKWAL 2 has been carefully designed to offer you 
the greatest pleasure in use. 
The profile of the helmet, its impermeability and the 
quality of the materials used enable air noise on the 
crown of the head and aerodynamic turbulence to be 
filtered as far as possible. In order for the use of your 
helmet to be as pleasant as possible, it is important 
for turbulence or air eddies created by the fairings not 
to impair the aerodynamic qualities of your SKWAL 2 
helmet. The shape of the fairings of your motorcycle 
and/or your size should not cause air eddies to reach 
the lower part of your helmet.

5 YEARS WARRANTY

 

5 YEARS WARRANTY

You have recently purchased a SHARK helmet for your safety 
and pleasure. It has been designed with the greatest care to 
satisfy your every requirement. For your safety, and that of 
your passenger, you must respect all the rules of prudence 
when using your two-wheeled vehicle. The SHARK 5-YEARS 
warranty guarantees the initial purchaser that any possible 
manufacturing fault or material defect will be covered by the 
SHARK warranty.

Limitations

If during the warranty period (5 years as from the date of 
purchase), a problem covered by the warranty were to arise, 
SHARK, through the intermediary of its sales network, under-
takes to repair or replace any defective components, up to a 
maximum limit which is the purchase value of the helmet. 
Any labour costs are normally paid by the SHARK network, 
but are submitted for approval prior to the work being car-
ried out. If the repair requires components to be dispatched 
incurring transportation costs, the SHARK network shall cover 
these costs up to a limit which is the cost of transport by the 
national postal service at the normal rate.

Exclusions

This warranty only covers problems related to materials or 
manufacturing. SHARK cannot be held liable with regard to 
the product in the following cases :

Any damage following

1) a fall or accident
2) a technical modification made by the user or a third party 
(glue, adhesives, paint, screws, etc.)
3) use of or contact with: harmful chemical products (inclu-
ding methylated spirits on the visor treatments), or an intense 
heat source
4) incorrect use: abnormal conditions (e.g. underwater), lack 
of maintenance or care
5) ageing due to normal wear of the inner fabrics or foams, 
the appearance of the external parts, or the visor (scratches, 
marks, etc.)
6) abnormal and prolonged exposure to ultra-violet light, in 
particular for the decorative colours. In addition, SHARK can-
not consider subjective considerations related to use of the 
helmet as defects covered by the warranty : problems with 
comfort, size, noise or whistling, aerodynamics, etc.

SHARK cannot be held liable for the temporary non-availa-
bility of the helmet while it is being enhanced to satisfy the 
needs of its owner. In all cases, the maximum warranty period 
is 5 years. Replacement of a component during this period 
does not prolong this period.

Procedure

 When the helmet is sold go to our website www.shark-
helmets.com in order to activate your warranty.
All warranty claims must be made to the SHARK dealer that 
sold the helmet.
For a warranty claim to be considered, the purchaser must 
notify the dealer of the problem that has arisen, and return 
the helmet that is the subject of the claim, together with the 
warranty card filled out when the helmet was purchased. This 
warranty does not affect in any way the statutory rights of the 
purchaser as stipulated by directive 1999/44CE.
The effects of this specific and limited warranty shall 
come to an end after a period of 5 years as from the 
date of purchase. After this period, if you continue to 
use a helmet regularly, we recommend that to bene-
fit from optimum protection and comfort you should 
replace your helmet. This is because certain external 

 

factors - general wear, certain impacts - could be prejudicial 
to the safety characteristics of this essential piece of protec-
tive equipment.
Limit SHARK reserves the right to carry out work within the 
terms of the warranty using replacement parts from the most 
recent version compatible with the model concerned, and is 
unable to guarantee perfect harmonisation of the paint or 
decorative elements associated with specific production runs 
and/or limited editions. In addition, the natural deterioration of 
colours over a period of time can cause mismatching in the 
adaptation of colours of spare parts.
If SHARK is unable to carry out the repair for technical reasons 
or because a component is not available, SHARK undertakes 
to make the customer an advantageous offer, taking account 
of the age of the helmet, consisting in either an identical new 
helmet or an equivalent model manufactured at the time of 
the repair, if the original model is no longer available.
This warranty is only valid for european continent.

Summary of Contents for SKWAL 2












Reviews: