6
ImPORtaNt:
Your steam mop needs
water to make steam! Never use your
steam mop without water in the tank.
Sweep or vacuum your floors prior to
cleaning with your
Shark
®
Steam Lite
Steam Mop.
Using Your Shark
®
Steam Lite Steam mop
1
Pull and twist the quick release
cord holder to unwrap the power
cord completely. (
fig. 6
) Plug into
a 220-240-volt electrical outlet.
The “
On
” light will turn blue. If the
light does not turn on, reference the
troubleshooting section on page 10.
(
fig. 7
)
When you use your steam mop for the
first time or if you have not used the unit
in awhile, it may take a minute or two
for the water to travel through the pump
and into the heater to create steam. Get
it started by pumping the handle a few
times. If you have waited a few minutes
and you still do not see any steam,
reference the troubleshooting section
on page 10.
fig. 6
fig. 7
CUSTOMER CARE - NZ: 0800 002 999
S3251NZ_11_ENG_IB_120613_4.indd 6
12-06-13 2:45 PM
