Shark S3502 Series, Owner'S Manual

Page: 3 / 20

3 www.sharkninjamanuals.com
15. DO NOT put hands or feet under the steam mop. Unit
gets very hot.
16. Use
ONLY
on flat, horizontal surfaces. Do not use on
walls, counters or windows.
17. DO NOT use on leather, wax polished furniture or
floors, synthetic fabrics, velvet or other delicate,
steam sensitive materials.
18. Liquid or steam must not be directed towards
equipment containing electrical components, such as
the interior of ovens.
19. DO NOT add cleaning solutions, scented perfumes,
oils or any other chemicals to the water used in this
appliance as this may damage the unit or make it
unsafe for use. If you live in a hard water area, we
recommend using distilled water in your steam mop.
20. When in use,
NEVER
turn the appliance over or
on its side. NEVER DIRECT STEAM TOWARDS
PEOPLE, ANIMALS OR PLANTS.
21.
NEVER LEAVE THE STEAM MOP IN ONE SPOT
ON ANY SURFACE FOR ANY PERIOD OF TIME
WHEN THE CLEANING POCKET IS ATTACHED.
22. Carefully remove the cleaning pocket immediately
after you have unplugged and allowed the steam
mop to cool.
23. When cleaning the steam mop, unplug the power
cord from the electrical outlet and clean with a dry
or damp cloth. Do not pour water or use alcohol,
benzene or paint thinner on the unit.
24. Extreme caution should be exercised when using this
appliance to clean stairs.
25. Never use steam mop without cleaning pocket
attached.
26. Keep your work area well lit.
27. Store steam mop indoors in a cool, dry place.
28. To avoid circuit overload, do not operate another
appliance on the same socket (circuit) as the steam
cleaner.
29. If an extension cord is absolutely necessary, an
extension cord rated a minimum of 15 ampere,
2.08mm
2
(14 AWG) cord should be used. Cords rated
for less amperage may overheat. Care should be
taken to arrange cord so that it cannot be pulled or
tripped over.
30.
DO NOT
leave your Steam Mop unattended when
the system is connected to a power supply/electrical
outlet.
31. DO NOT store unit with damp or wet cleaning pocket
attached. Never leave the steam mop in one spot on
any surface for any period of time with a damp or wet
cleaning pocket attached as this will damage your
floors.
32. Always unplug and allow the steam mop to cool
before removing or changing mop heads.
33. Make sure that the water tank door is closed when
using the appliance.
WARNING:
Your steam mop is designed
to clean hard floor surfaces that will withstand high
heat. Do not use on unsealed wood or unglazed
ceramic floors. On surfaces that have been treated
with wax or some no wax floors, the sheen may
be removed by the heat and steam action. It is
always recommended to test an isolated area of
the surface to be cleaned before proceeding. We
also recommend that you check the use and care
instructions from the floor manufacturer.
SAVE THESE
INSTRUCTIONS