Shark S3502 Series, Owner'S Manual, Page: 9 / 20

5 www.sharkninjamanuals.com
Using Your Steam Mop
2 Pump the handle a few times in a downward motion.
This pumping action will release steam as you
mop and allows you to customise the amount of
steam you want. Begin mopping with a forward and
backward motion. The natural motion of mopping
will produce steam.
NOTE: Make sure the floors are swept or vacuumed
before using the steam mop.
1
Pull and twist the quick release cord holder to
unwrap the power cord completely. A great time
saver!
Plug into an electrical outlet. The power “On” light
will turn blue, it takes approximately 30 seconds for
the mop to heat up and the steam to be ready.
IMPORTANT: Make sure you don’t use the mop
without attaching a cleaning pocket and adding
water to the tank first. When you are using the
mop for the first time, it might take longer than the
normal 30 seconds to start steaming. Just pump the
handle a few times in a downward motion to prime
the pump and it should be ready.
2
1