StEam CLEaNING
4
For your comfort, you can adjust the height
of the mop. Just lift the latch on the tube
90 degrees to the open position. Holding
the handle, extend the tube to the desired
height and then close the latch to the
locked position.
5
Plug in the mop. Wait 30 seconds for the
unit to heat up and the steam to be ready.
Push the handle toward the mop head in a
pumping motion. Customise steam output
by slow or fast mopping with a forward and
backward motion. (
fig. 4
)
Quick Start
fig. 4
QUICk tIP:
For easier
pushing and
pulling, extend
the handle
length.
NOtE:
Do not leave your Steam Mop
unattended during use.
ImPORtaNt:
Never leave the steam
mop in one spot for any period of time
with a damp or wet microfibre pocket
attached as this will damage your
floors.
CUSTOMER CARE - AU: 1800 890 840
