6
ImPORtaNt:
Your steam mop needs water to
make steam! Never use your steam mop without
water in the tank.
Sweep or vacuum your floors prior to cleaning
with your
Shark
®
Steam Lite
Steam Mop.
Using Your Shark
®
Steam Lite Steam mop
1
Pull and twist the quick release cord holder to
unwrap the power cord completely. (
fig. 6
) Plug
into an electrical outlet. The “
On
” light will turn
blue. If the light does not turn on, reference the
troubleshooting section on page 10. (
fig. 7
)
When you use your steam mop for the first time or
if you have not used the unit in awhile, it may take
a minute or two for the water to travel through the
pump and into the heater to create steam. Get it
started by pumping the handle a few times. If you
have waited a few minutes and you still do not see
any steam, reference the troubleshooting section on
page 10.
fig. 6
fig. 7
CUSTOMER CARE - NZ: 0800 002 999
