4
Freephone: 0800 862 0453
5
www.sharkclean.eu/uk
PLACING THE MICROFIBRE CLEANING PAD
1
Place the microfibre cleaning pad underneath
the mop head, with the quick fastener strips
facing up. Simply press the pad on to the Steam
Mop.
IMPORTANT:
Make sure you only add water to
the tank. Chemicals or cleaning solution may
damage the appliance and could be unsafe for
you and your family.
FILLING THE WATER TANK
IMPORTANT:
Before you fill up the tank, make
sure your Steam Mop is unplugged from the
wall.
1
First, remove the water tank cap by turning it
counter clockwise to the unlocked position. See
illustration for a visual explanation.
2
The filling flask included with your Steam Mop
makes filling the water tank as simple as getting
a glass of water from the sink. Fill the flask with
water and pour it into the tank. Be sure to keep
the water under the “MAX FILL” line; just one
flask of water is enough for your Steam Mop.
See illustration for a visual explanation.
3
Replace the water tank cap by turning it
clockwise to the locked position.
NOTE:
Don’t be alarmed if the first time you use
your Steam Mop, you notice water inside the
water tank or drops of water in the packaging.
It’s normal to see this water. Your Steam Mop
was 100% tested in the factory to ensure your
safety and your floor’s happiness. If you see
water in the unit, it’s from these tests.
To order additional microfibre pads, feel free to
contact us at: Freephone 0800 862 0453.
The water tank cap has an arrow to indicate
the locked and unlocked position.
1
1
Always attach the cleaning pad to the mop
head or you may scratch your floor surface.