PRIME STEAM
5
Plug in the mop. Wait 30 seconds
for the unit to heat up and the
steam to be ready.
Push the handle toward the mop
head in a pumping motion. To prime
simply pump the handle 10-15 times
to generate the steam.
QUICK TIP:
Customise steam
output by slow or fast mopping with
a forward and backward motion.
Quick Start
Freephone: 0800 862 0453
ASSEMBLE
1
Fit together the extension tubes as shown
in the illustration. See page 2 for more
detailed assembly instructions.
2
Place the microfibre cleaning pad
underneath the mop head, with quick
fastener strips facing up. Simply press the
pad to the mop to attach it.
ADJUST
4
For your comfort, you can adjust the height
of the mop. Just lift the latch on the tube
90 degrees to the open position. Holding
the handle, extend the tube to the height
that’s right for you and then close the latch
to the locked position.
QUICK TIP:
If you find the Steam Mop
difficult to push/pull during use, then
simply increase the height of the pole.
Quick Start
www.sharkclean.eu/uk
FILL
3
Remove the cap to fill the Water Tank.
Using the filling flask, fill the tank, keeping
the water under the “MAX FILL” line. Don’t
forget to replace the cap.
2
3
1
5
4
