2
Freephone: 0800 862 0453
3
www.sharkclean.eu/uk
Getting Started
YOUR SHARK
®
STEAM MOP IS
EASY TO ASSEMBLE
1
First remove all the parts from the package.
We know you’re excited about the Shark
®
Steam Mop, but don’t plug it in until it’s fully
assembled and you’ve read all of the following
instructions.
2
Slide the upper extension tube (the tube with the
handle) into the lower extension tube (the short
tube). Push the two extension tubes together
until you hear it click into place. See illustration
for a visual explanation.
IMPORTANT:
Always make sure that your Steam
Mop is unplugged from the wall before you
attach the microfibre cleaning pad.
When assembling your steam mop there may be
a little water in or around the water tank. This is
because we test all our steam mops 100% before
you buy them, so you get a quality Shark
®
Steam
Mop.
3
Insert the pieces you assembled in Step 2 into
the pump actuator (the tube that leads to the
tank). Push the extension tube assembly and
pump actuator together in until you hear it click
into place. Insert cord into cord clip on the shaft
of the steam-mop.
2
3
a
b
c
d
e
FIRST THINGS FIRST, YOU NEED TO KNOW
WHAT’S IN THE BOX YOU JUST OPENED:
a
Upper Extension Tube
b
Lower Extension Tube (Telescopic)
c
Steam Mop Base
d
Microfibre Pad (2X)
(P099W)
e
Filling Flask
(1039SO)
Always attach the microfibre cleaning pad
to the mop head or you may scratch your
floor surface.
