Shark Rocket HV380EU2, Instructions Manual

Page: 63 / 224

ENGLISH
s h a r kc l e a n . e u 63
CLEANING THE FILTERS
1
Access the Pre-Motor foam and felt
filters by lifting the latch on the top of the
handheld vacuum. Remove and rinse
the filters with water. Tap loose dirt off
filters between washes as needed. Once
completely dry, insert the felt filter first,
then place the foam filter on top of it.
2 Access the Post-Motor filter under the
handle. Remove and rinse the filter
with water.
2 Hold dust cup over a trash bin and press
the Empty button on the front of the dust
cup. The bottom lid will open, allowing the
debris to fall out.
3 Once dust cup is empty, close the bottom
lid and insert dust cup back into handheld
vacuum until you hear it click into place.
Post-Motor filter
Pre-Motor filters
Foam
Felt
Empty
Dust Cup
Release
Clean Filter