sharkclean .com
sharkclean .com
NOTE:
All accessories are compatible with both the wand and the handle.
WHOLE-HOME CLEANING
CLEANING MODES
To engage brushrolls, turn power on, then
step on floor nozzle and tilt handle back.
WHAT DOES THE BRUSHROLL
INDICATOR LIGHT MEAN?
Solid Green:
The brushroll and Soft Roller are
spinning and working properly.
Solid Red:
There is a jam in the brushroll area.
Turn your vacuum off and remove any blockages
in the nozzle.
Flashing Red:
The motorized floor nozzle is
overheating. Turn off your vacuum and wait for
it to cool down. After vacuum has cooled for 60
minutes, push the power button to turn the vacuum
back on and select the Carpet setting.
Press the
Extension
Wand Release
button to
detach the wand from the pod.
To clean carpeted floors, press
CARPET
on
the surface selector switch. In this mode, both
brushrolls spin faster, working together to pick up
debris below the surface of your carpets.
NOTE:
The brushrolls will not spin unless the wand is reclined.
To clean bare floors, press
HARD FLOOR
on the
surface selector switch. In Hard Floor mode, the
Brushroll
and the
Soft Roller
spin together slowly.
The Soft Roller traps fine dust and large particles,
while the brushroll directs the debris into the
suction channel.
NOTE:
The brushrolls will not spin unless the wand is reclined.
Push the
POWER
button to turn the vacuum on or off.
Detach wand from pod (see above). Press the
Floor Nozzle
button to remove the pod from
the floor nozzle. Attach a cleaning accessory to
the end of the wand.
Press the
Handle Release Latch
to detach the
handle from the wand.
Remove the wand from the pod and the
handle (see above). Press the
Floor Nozzle
button to remove the pod from the floor
nozzle. Attach a cleaning accessory to the handle.
UPRIGHT
HARD FLOOR
ABOVE-FLOOR—HANDLE
LIFT-AWAY®—HANDLE
ABOVE-FLOOR—WAND
CARPET
LIFT-AWAY—WAND
WHOLE-HOME CLEANING
SETTINGS
BRUSHROLL INDICATOR LIGHT
SUCTION CONTROL
NOTE:
For deep cleaning per ASTM F 608 (embedded dirt in carpets) please select
Carpet
mode.
NOTE:
For particularly
stubborn stuck-on dust messes on hard floors, select
Carpet
.
To reduce suction for more maneuverability
on carpets, slide
Suction Control
to
MIN
.
Slide to
MAX
for more suction on bare floors.
SUCTION CONTROL
