sharkclean .com
sharkclean .com
CHECKING FOR BLOCKAGES
Detach wand from floor nozzle and handle, and
check both ends for blockages.
Detach wand from floor nozzle, tilt nozzle neck
back, and check opening for blockages.
Detach handle from wand and hose from the
vacuum pod, and check openings for blockages.
NOTE:
To order replacement parts and filters, visit
sharkaccessories.com
.
1.
Push up both sliders on floor nozzle at the same
time to pop up the brushroll garage lid.
2.
Remove any string or other debris that may be
wrapped around the brushroll.
1.
Push up both sliders on floor nozzle at the same
time to pop up the brushroll garage lid.
2.
To remove
Soft Roller
from nozzle, lift it out by
the pull tab on the right side.
3.
You can also tap loose debris off the Soft Roller,
or wipe it clean with a dry towel. If you see any
hair buildup or fibers caught in the teeth behind
the Soft Roller, wipe clean with a dry towel.
4.
Wash the Soft Roller as needed. Use only water,
and let air-dry completely for at least 24 hours.
5.
Reinsert Soft Roller until it is secured, then
place the garage door lid onto the nozzle and
press down until it securely clicks in place on
both sides.
BRUSHROLL
SOFT ROLLER
CLEANING OR REPLACING THE SELF-CLEANING BRUSHROLL
MAINTENANCE
SLIDE BUTTONS
LIFT COVER
Detach floor nozzle from vacuum pod,
and check opening on bottom of pod
for blockages.
NOTE:
If any hair is wrapped around the brushroll,
extending cleaning time will allow the self-cleaning
brushroll to remove it for you.
