Shark Pursuit UV209, Owner'S Manual

Page: 12 / 20

19
FAMILIARISEZ-VOUS AVEC ASPIRATEUR VERTICAL
CYCLONIQUE SANS SAC
PROBLEM SOLVING
This appliance was inspected thoroughly and was in good operating condition when it
was shipped from the factory. If a minor problem occurs, it usually can be solved quite
easily when the cause is found. Therefore, this checklist is provided for your
convenience.
PROBLEM POSSIBLE CAUSE POSSIBLE
Cleaner Won’t
Run
1. Not properly plugged into
wall outlet.
2. No electricity in wall outlet.
3. On/Off switch not turned
on.
4. Motor thermostat tripped.
5. Blown
fuse/tripped
breaker.
1. Plug in firmly.
2. Check fuse or breaker.
3. Push on/off switch to on
4. Reset
motor thermostat.
5. Reset circuit breaker or replace
fuse.
Cleaner Won't
Pick Up
1. Full or clogged dust cup.
2. Wrong pile height setting.
3. Clogged
nozzle.
4. Clogged dust inlet port.
5. Clogged hose.
6. Broken belt.
7. Hose not inserted fully.
8. Dirty
filters.
9. HEPA filter needs
cleaning or replacing.
10. HEPA filter frame needs
cleaning
1. Clean dust cup.
2. Adjust setting.
3. Remove
obstruction.
4. Remove power head cover and
remove obstruction.
5. Remove obstruction.
6. Replace belt.
7. Push hose in securely.
8. Clean / change filters.
9. Clean or replace HEPA filter.
10. Clean HEPA filter frame.
Cleaner Picks
Up Moveable
Rugs Or
Pushes Too
Hard
1. Wrong pile height setting. 1. Adjust setting.
Agitator Does
Not Turn
1. Broken belt.
2. Belt installed incorrectly.
1. Replace belt.
2. Check belt changing and agitator
cleaning.
Air Driven
Turbo Brush
Does Not
Rotate Or
Rotates
Slowly
1. Rotating brush, turbine or
elbow obstructed.
2. Belt broken.
3. Hose obstructed.
4. HEPA filter clogged.
1. Clear obstructions.
2. Call
1-800-798-7398.
3. Clear obstruction.
4. Clean HEPA filter.
Air Flow
Restricted
With
Attachment
Use Sound
Changes
1. Attachment use restricts
air flow.
2. New carpet debris
clogging air path.
1. Check attachment.
2. Remove
obstruction.
10. Boyau souple
11. Cordon d’alimentation
12. Porte-cordon à relâche rapide
13. Brosse ronde
14. Brosse à meubles
15. Suceur plat
16. Boyaux de rallonge (x2)
17. Raccord de tuyau
18. Sélecteur tapis-plancher
19. Brosse turbo actionnée à l’air 1. Poignée supérieure
2. Bouton d’alimentation On/Off
3. Levier de relâche de la coupelle
4. Coupelle à poussière
5. Cadre du filtre HEPA
6. Sélecteur de hauteur de tapis
7. Garde-meuble
8. Lampe
9. Électrobrosse motorisée
Spécifications techniques
Tension : 120 V, 60 Hz
Intensité : 12 A
Remarque : Les illustrations peuvent différer de l’appareil lui-même.
27 10